Wiring guide for the GSM Alarm Auto-dialler with Texecom Veritas R8

Hello.  Is the GSM auto dialer compatible with the Veritas R8?  Could you provide the wiring instructions to use it with the R8 please?

Wiring the Advent Controls GSM Dialer and SMS sender to the Veritas R8

GSM Dialer to Veritas R8 Wiring

Hi,

Thank you for your email.  It’s quite straight forward with your panel.  To power the GSM Dialer you can use the auxiliary output on your Texecom panel.  The positive (+) terminal is connected to one of the VIN terminals (the lower one is best as it has on-board thermal fuse protection) and the negative (-) terminal to GND on the GSM Dialer PCB.  You then connect the BELL terminal to input A or B.

They are the only connections you need.

Regards,

Advent Controls

The GSM Dialler is available from our online shop here

GSM Dialer

GSM Alarm Auto-dialer

Advertisements

One thought on “Wiring guide for the GSM Alarm Auto-dialler with Texecom Veritas R8

  1. Pingback: Wiring guide GSM Alarm Auto-dialler with Texecom Veritas R8 with Alarm Reset | Advent Controls Blog

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s