Hi Michael,
How do I activate the relay on my dialer board, by activating the Input A.
At the moment I activate the relay by making a call to the unit. I would rather the relay made when the input is activated.
Thanks
John
To activate the output, as per a telephone call, using input A you send the message:
exit enable
You can connect an exit switch to input A to use the board as a full access control system which is what the command was originally intended for. However it can be used for any purpose. With this enabled any trigger on input A is seen as a telephone call from a recognised number.
Hi Michael,
How do I activate the relay on my dialer board, by activating the Input A.
At the moment I activate the relay by making a call to the unit. I would rather the relay made when the input is activated.
Thanks
John
Hi John,
To activate the output, as per a telephone call, using input A you send the message:
exit enable
You can connect an exit switch to input A to use the board as a full access control system which is what the command was originally intended for. However it can be used for any purpose. With this enabled any trigger on input A is seen as a telephone call from a recognised number.
Thanks for your question,
Michael